Home Page arrow Products Inventory arrow BUTTON PUNCH SNAP LOCK MODEL 20
BUTTON PUNCH SNAP LOCK MODEL 20 Print E-mail
  Tuesday, 19 February 2008
Image The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly.  The male seam is a button, the female seam is a lock and the two snap together for a flush corner......
LOCKFORMER BUTTON PUNCH SNAP LOCK MODEL 20

The Button Punch Snap Lock Machines form  two  piece   seam   that   greatly  simplifies   ductwork  assembly. The male seam is a  button,  the female  seam  is a  lock and  the two snap together for a flush corner. These machines can  form  20 to 30 gauge   sheet   metal   into   female  locks  on  the  inboard  and  button punched right  angle flanges on outboard rolls at speeds of 60-65 fpm and are  available  in   seven   and   nine  forming   station machines.  Not  only  do   these   locks  assemble  twice as fast as traditional methods, but because the two pieces nest,  they are easier to  transport too. Image

         Image          
Image                        Image                   Image


Machine Specifications

Item

 Parameter

Forming Station 9
Thickness (mm) 1.0
Material Galvanized Mild Steel
Material Used (mm) 44.45
Forming Speed (m/min) 12.43
Power (Kw) 3
Voltage (V) 220
Phase (P) 1
Frequency (Hz) 50
Drive Chain
Dimensions (mm) 1486 long × 610 wide × 1042 high
Weight (Kg) 327


Auxiliary Rolls Specifications
Image
Last Updated ( Tuesday, 08 April 2008 )
< Previous   Next >